eSUN PLA-LW 1.75mm 3D Filament 1KG
(37Reviews)
1/1
eSUN ePLA-LW 3D Printer Filament 1.75mm 1KG 2.2LBS 3D Printing Filament Light Weight foam Material for 3D Printer aircraft
| Brand | eSUN |
| Material | PLA |
| Item Weight | 1KG |
| Item Diameter | 1.75 Millimeters |
About this item
【Low density & High Foaming Volume Ratio】
| PLA-LW |
【Clog-free & No Warping & Less-tangle 】
Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping.eSUN ePLA-LW filament is orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.It does not overlap or tangle,no cracking. It has an excellent printing successful rate for large printing models and don't need a constant temperature chamber.
【Easy to Paint & Wide Application】
eSUN ePLA-LW lighweight PLA filament is very easy to paint and has a strong adhesion of surface paint. So it is a good choice for model airplanes, drones, and COSPLAY props.
【Good Interlayer Adhesion & Matte Printing Effect】
Compared to wood PLA filament,ePLA-LW filament has more stable interlayer adhesion, and the foaming rate and strength can be controlled by adjusting the printing temperature between 210℃-270℃. Printing models is explosion resistant and easy to repair with delicate matte surface effect.
【Foaming When Printing】
At around 210°C-270°C, this filament starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts. For same model and printing speed, ePLA-LW enables the model aircraft to have a lighter wing load and a lower stall speed. For models such as airplanes, under the condition of balanced strength, reducing the weight can greatly improve the performance of the airplane.
￡35.99
Final price and VAT may change based on shipping destination at checkout.
30% OFF WITH PURCHASE OVER 15 UNITS
Code:30OFF
30OFF
20% OFF WITH PURCHASE OVER 4 UNITS
Code:20OFF
20OFF
Share:
